Holmes Instafurnace with Thermostat Manual

The Holmes Instafurnace with Thermostat is a compact, energy-efficient portable heater featuring adjustable thermostat control, multiple heat settings, safety tip-over switch, overheat protection, cool-touch exterior, easy-grip handles, and LED operation indicator. Designed for rooms up to 150 square feet with 120V AC power. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Thermostat Operation 7. Safety Features 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Heating element with thermostat control, LED indicator light, safety tip-over switch, overheat protection, adjustable thermostat dial, heat settings selector, power cord with storage.

Feature	Description
Thermostat Control	Adjustable temperature setting from 60°F to 85°F
Heat Settings	High heat (1500W), Low heat (750W), Fan only
Safety Tip-Over Switch	Automatically shuts off if unit is tipped over
Overheat Protection	Thermal cutoff prevents overheating
Cool-Touch Exterior	Safe to touch during operation
LED Indicator Light	Shows when unit is powered on
Easy-Grip Handles	For safe and easy portability
Power Cord Storage	Built-in cord wrap for neat storage
Compact Design	Fits in small spaces, ideal for personal heating

Installation & Placement

Unpack and inspect contents. Choose proper location for operation.

Select location: Place on flat, stable, level surface away from foot traffic.
Clearance requirements: Minimum 3 feet from walls, furniture, and combustible materials.
Power connection: Plug directly into 120V wall outlet; avoid extension cords.
Positioning: Ensure unit is upright and not obstructing air vents.

WARNING! Keep away from water sources and high humidity areas. Do not use in bathrooms or near sinks.

First-Time Setup

Initial setup for optimal performance and safety.

Inspect unit: Check for any shipping damage before use.
Position heater: Place on stable surface with proper clearance.
Power connection: Plug into dedicated 120V outlet.
Initial operation: Turn thermostat to highest setting, select HIGH heat for initial warm-up.
Adjust thermostat: Turn to desired temperature setting once room reaches comfort level.

CAUTION! Never cover heater or block air intake/output vents. Ensure unit remains upright during operation.

Specifications

Heating Coverage: Up to 150 square feet
Power Settings: High (1500W), Low (750W), Fan Only
Thermostat Range: 60°F to 85°F adjustable
Safety Features: Tip-over switch, overheat protection, cool-touch casing
Power Requirements: 120V AC, 60Hz, 12.5A maximum
Dimensions: Compact design for easy placement
Weight: Lightweight for portability
Certifications: ETL listed, meets UL standards

Controls and Settings

Front control panel: Thermostat dial, heat settings switch, power indicator LED.

Thermostat Dial: Rotate clockwise to increase temperature setting, counterclockwise to decrease. Unit cycles on/off automatically to maintain set temperature.

Heat Settings Switch: Three positions - HIGH (1500W for quick heating), LOW (750W for maintaining temperature), FAN (circulates air without heat).

LED Indicator: Illuminates when unit is powered and heating. Blinks during safety shutdown.

Thermostat Operation

The thermostat maintains your desired room temperature automatically.

Set desired temperature: Turn thermostat dial to preferred setting.
Select heat setting: Choose HIGH for rapid heating or LOW for energy-efficient operation.
Automatic cycling: Heater turns on when room temperature drops below set point, off when reached.
Energy saving: Use LOW setting once room is warm to maintain comfort efficiently.

Tip: For most efficient operation, set thermostat to lowest comfortable temperature.

Safety Features

Multiple safety systems protect against hazards.

Safety Feature	Function
Tip-Over Switch	Automatically cuts power if unit is knocked over
Overheat Protection	Thermal cutoff shuts off heater if internal temperature exceeds safe limits
Cool-Touch Housing	Exterior remains safe to touch during operation
Stable Base	Wide footprint prevents accidental tipping
Automatic Shutoff	Safety systems reset automatically when normal conditions return

WARNING! Never leave heater unattended while operating. Keep children and pets away from unit.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

Unplug heater and allow to cool completely before cleaning.
Exterior cleaning: Wipe with soft, dry cloth only.
Air vents: Use vacuum with brush attachment to remove dust from intake and output vents.
Storage: Wrap cord around built-in storage, store in dry location.

CAUTION! Do not immerse in water or use liquid cleaners. Do not operate if damaged.

Regulatory Information

ETL Listed: Meets safety standards for portable electric heaters. Complies with FCC Part 15 for electromagnetic compatibility. Copyright © Holmes Products. For technical support or service, contact customer service at 1-800-546-5637 or visit www.holmesproducts.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater not turning on	Power source/tip-over	Check wall outlet; ensure unit is upright; reset tip-over switch
No heat output	Settings/overheat	Verify heat setting selected; allow unit to cool if overheat protection activated
Heater cycles frequently	Thermostat setting	Adjust thermostat to higher setting; check for drafts near unit
Unusual odors	First use/dust	Normal during first use; clean air vents if dust accumulation
LED blinking	Safety shutdown	Unplug unit, check for obstructions, allow to cool, plug back in

Reset: Unplug unit for 10 minutes to reset all safety systems.

Service: 1-800-546-5637; www.holmesproducts.com