Pelonis Disc Furnace Manual

The Pelonis Disc Furnace is an efficient electric heating unit featuring disc heating technology, adjustable thermostat control, multiple heat settings, safety tip-over switch, overheat protection, cool-touch exterior, energy-saving mode, portable design with carry handle, and LED operation indicators. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Instructions 7. Safety Features 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Disc heating element, Thermostat control knob, Heat settings selector, Power indicator light, Safety tip-over switch, Overheat protection, Carry handle.

Feature	Description
Disc heating element	Provides efficient radiant heat distribution
Thermostat control	Adjustable temperature settings from 1-5
Heat settings	Low (750W), Medium (1125W), High (1500W)
Power indicator light	LED shows when unit is operating
Safety tip-over switch	Automatically shuts off if unit tips over
Overheat protection	Thermal cutoff prevents overheating
Carry handle	For easy portability
Cool-touch exterior	Safe surface temperature during operation
Energy-saving mode	Eco setting for reduced power consumption
Power cord	6-foot heavy-duty cord with storage wrap

Installation & Placement

Unpack and inspect contents. Choose proper location for operation.

Clear area: Ensure 3 feet clearance from walls, furniture, and combustible materials.
Level surface: Place on stable, flat, non-flammable surface.
Power connection: Plug directly into wall outlet; avoid extension cords.
Ventilation: Ensure adequate air circulation around unit.

WARNING! Do not place under furniture or near curtains. Keep away from water sources.

First-Time Setup

Initial operation and basic configuration.

Position heater: Place on stable surface in desired location.
Connect power: Plug into grounded 120V outlet.
Set thermostat: Turn knob to desired temperature setting.
Select heat level: Choose Low, Medium, or High setting.
Verify operation: Check that power indicator light illuminates.

CAUTION! Do not cover heater or block air vents during operation.

Specifications

Heating Technology: Disc heating element
Power Settings: Low (750W), Medium (1125W), High (1500W)
Thermostat Range: 1-5 (cool to warmest)
Safety Features: Tip-over switch, overheat protection
Power Source: 120V AC, 60Hz
Cord Length: 6 feet
Dimensions: Standard compact design
Weight: Lightweight for portability
Operating Temp: Standard indoor conditions

Controls and Settings

Front panel controls: Thermostat knob, Heat selector switch, Power indicator.

Thermostat Control: Rotate knob to set desired room temperature (1=coolest, 5=warmest).

Heat Settings: Low (750W) for mild heating, Medium (1125W) for average rooms, High (1500W) for quick heating. Power Indicator: LED light shows when heater is operating. Energy Saving: Use lower settings for efficient operation.

Operating Instructions

Daily operation procedures and best practices.

Power on: Plug into outlet; indicator light should illuminate.
Set temperature: Turn thermostat knob to desired setting.
Select heat level: Choose appropriate power setting for room size.
Monitor operation: Ensure proper airflow and heating performance.
Power off: Turn thermostat to OFF position before unplugging.

Tip: Start with lower settings and increase gradually for energy efficiency.

Safety Features

Built-in protection systems for safe operation.

Feature	Function
Tip-over switch	Automatically cuts power if unit is knocked over
Overheat protection	Thermal cutoff prevents dangerous overheating
Cool-touch cabinet	Exterior remains safe to touch during operation
Stable base	Wide footprint reduces tipping risk
Automatic shut-off	Safety systems engage when needed

WARNING! Never leave heater unattended while operating.

Maintenance & Cleaning

Unplug and cool completely before cleaning. Use soft, dry cloth only.

Exterior cleaning: Wipe with dry cloth; no liquids or cleaners.
Vent cleaning: Ensure air vents are free of dust and obstructions.
Cord inspection: Check power cord for damage before each use.
Storage: Coil cord neatly and store in dry location.

CAUTION! Do not immerse in water or use abrasive cleaners.

Regulatory Information

UL Listed: Meets safety standards for electric heaters. FCC Compliance: Class B digital device. Copyright © 2025 Pelonis; all rights reserved. For support, visit www.pelonis.com or contact 1-800-555-HEAT.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater not turning on	Power source/tip-over	Check outlet power; ensure unit is upright; reset tip-over switch.
No heat output	Settings/thermostat	Verify heat setting selection; adjust thermostat to higher setting.
Heater shuts off unexpectedly	Overheat protection	Check for blocked vents; allow unit to cool; reduce heat setting.
Unusual odors	First use/dust	Normal during first use; runs should dissipate after few minutes.
Indicator light not working	Power connection	Check power cord connection; test outlet with another device.

Reset: Unplug for 10 minutes, then reconnect if issues persist.

Service: 1-800-555-HEAT; www.pelonis.com