Pelonis Disc Furnace Model 1500W II Manual

The Pelonis Disc Furnace Model 1500W II is a high-efficiency electric space heater featuring disc furnace technology, 1500W heating capacity, adjustable thermostat, multiple heat settings, safety tip-over switch, overheat protection, cool-touch exterior, energy-saving mode, portable design with carry handle, and LED indicator lights. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Installation & Placement 4. Specifications 5. Controls and Operation 6. Heating Settings 7. Energy Saving Features 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Disc furnace heating element, Control panel, Thermostat dial, Power switch, Heat settings selector, Safety tip-over switch, Overheat protection, Carry handle, LED power indicator.

FeatureDescription
Disc Furnace TechnologyAdvanced heating element for efficient warmth
1500W Heating CapacityMaximum heating power for medium to large rooms
Adjustable ThermostatDial control for desired temperature setting
Multiple Heat SettingsHigh, Low, and Energy Saving modes
Safety Tip-Over SwitchAutomatically shuts off if unit tips over
Overheat ProtectionBuilt-in thermal cutoff for safety
Cool-Touch ExteriorSafe exterior surface temperature
Portable DesignCompact with integrated carry handle
LED Indicator LightsPower and heating status indicators
Energy Saving ModeEco-friendly operation setting

Safety Precautions

Important safety instructions for proper operation.

  1. Keep combustible materials at least 3 feet from front, sides, and rear.
  2. Do not use in wet or damp areas like bathrooms.
  3. Always place on stable, level surface to prevent tipping.
  4. Do not cover or block air intake or outlet vents.
  5. Unplug when not in use and before cleaning.

WARNING! Risk of fire or electric shock. Do not operate with damaged cord or plug. Keep children and pets away from hot surfaces.

Installation & Placement

Proper placement for optimal performance and safety.

  1. Choose location: Place on hard, level surface away from foot traffic.
  2. Clearance: Maintain 3-foot clearance from walls, furniture, and curtains.
  3. Power source: Plug directly into 120V AC wall outlet; avoid extension cords.
  4. Positioning: Ensure unit is upright and stable on floor.
  5. Ventilation: Keep air vents unobstructed for proper airflow.

CAUTION! Never place on carpets or rugs that could block bottom vents. Ensure proper electrical outlet rating.

Specifications

Controls and Operation

Front control panel: Power switch, Thermostat dial, Heat selector, LED indicators.

Operation Steps:

  1. Place heater on stable, level surface
  2. Plug into proper electrical outlet
  3. Turn Power switch to ON position (LED illuminates)
  4. Select heat setting: High, Low, or Energy Saving
  5. Adjust thermostat dial to desired temperature
  6. Heater will cycle on/off to maintain set temperature

LED Indicators: Green light indicates power on; Orange light indicates heating active.

Heating Settings

Three heating modes for different needs.

  1. High Setting: 1500W maximum heat for quick warming
  2. Low Setting: 900W for maintained comfort and energy efficiency
  3. Energy Saving Mode: Automatically cycles between High and Low to maintain temperature while conserving energy

Thermostat Control: Turn dial clockwise for warmer temperature, counter-clockwise for cooler. Heater will automatically cycle to maintain set temperature.

Energy Saving Features

Designed for efficient operation to reduce electricity costs.

Tip: Use Energy Saving mode for overnight operation or when maintaining consistent room temperature.

Safety Features

Multiple safety systems for worry-free operation.

FeatureFunction
Tip-Over SwitchAutomatically cuts power if unit is knocked over
Overheat ProtectionThermal cutoff shuts off heater if internal temperature exceeds safe limits
Cool-Touch CabinetExterior remains safe to touch during operation
Stable BaseWide footprint design resists tipping
Automatic Shut-offTurns off when desired temperature is reached

Note: If heater repeatedly shuts off, check for obstructions and ensure proper clearance.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Unplug heater and allow to cool completely before cleaning
  2. Wipe exterior with soft, dry cloth only
  3. Clean air intake and outlet vents with vacuum brush attachment
  4. Store in dry location when not in use for extended periods
  5. Inspect power cord regularly for damage

CAUTION! Never immerse in water or use liquid cleaners. Do not operate if cord or plug is damaged.

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Energy Efficiency: Meets ENERGY STAR guidelines where applicable. Manufactured for Pelonis; patents pending. For technical support or service, contact 1-800-555-HEAT or visit www.pelonis.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Heater not turning onPower source/switchCheck wall outlet; ensure power switch is ON; check circuit breaker.
No heat outputSettings/thermostatVerify heat setting selection; adjust thermostat to higher temperature.
Heater shuts off unexpectedlyOverheat/tip-overCheck for obstructions; ensure unit is upright; allow to cool and restart.
Unusual noisesForeign objectsTurn off and unplug; check for objects in vents; contact service if persistent.
LED indicators not workingPower connectionVerify plug is fully inserted in outlet; try different outlet.

Reset: Unplug for 10 minutes, then restart if issues persist.

Service: 1-800-555-HEAT; www.pelonis.com

Pelonis Disc Furnace Model 1500W II Manual © - All Rights Reserved 2025