Pelonis Safe-T-Furnace Manual

The Pelonis Safe-T-Furnace is a high-efficiency residential heating system featuring advanced safety mechanisms, energy-saving technology, digital temperature control, multiple heat settings, overheat protection, tip-over safety switch, cool-touch exterior, and easy maintenance access. Designed for 120V AC operation with automatic thermostat control. Below are essential sections covering safety guidelines, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Features 7. Operation Guide 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital thermostat, Overheat protection, Tip-over switch, Multiple heat settings, Energy saving mode, Cool-touch housing, Carry handle, LED indicator lights.

FeatureDescription
Digital thermostatPrecise temperature control from 60°F to 90°F
Overheat protectionAutomatic shut-off if internal temperature exceeds safe limits
Tip-over safety switchAutomatically turns off if unit is knocked over
Multiple heat settingsLow (750W), High (1500W), and Energy Save modes
Cool-touch exteriorSafe surface temperature during operation
Carry handleFor easy portability
LED power indicatorShows when unit is operating
Energy saving modeAutomatically cycles to maintain set temperature efficiently
Thermostat control knobManual temperature adjustment
Power cord storageIntegrated cord wrap for neat storage

Installation

Unpack and inspect contents. Place on stable, level surface away from combustible materials.

  1. Choose location: Minimum 3 feet from walls, furniture, and combustible materials.
  2. Ensure proper clearance: At least 3 feet from ceiling and 1 foot from floor.
  3. Check power source: Use dedicated 120V AC outlet; avoid extension cords.
  4. Position unit: Place on firm, level surface; ensure tip-over switch can function properly.

WARNING! Keep away from water sources and high humidity areas. Do not use in bathrooms or near sinks.

First-Time Setup

Initial setup for safe operation and optimal performance.

  1. Inspect unit: Check for any shipping damage before use.
  2. Position correctly: Ensure unit is upright on stable surface.
  3. Plug into outlet: Use proper 120V AC grounded outlet.
  4. Set thermostat: Turn knob to desired temperature setting.
  5. Select heat setting: Choose Low, High, or Energy Save mode.
  6. Test safety features: Verify tip-over switch and overheat protection function.

CAUTION! Never cover or block air vents. Ensure proper ventilation at all times.

Specifications

Controls and Settings

Front panel controls: Thermostat knob, Heat setting switch, Power indicator light.

Thermostat Control: Rotate knob clockwise to increase temperature, counterclockwise to decrease. Unit cycles automatically to maintain set temperature.

Heat Settings: LOW (750W) for mild heating, HIGH (1500W) for maximum heat output, ENERGY SAVE for efficient temperature maintenance.

Indicator Lights: Power light illuminates when unit is operating. Safety light indicates when protection features are active.

Safety Features

Multiple safety mechanisms ensure safe operation in residential environments.

  1. Overheat Protection: Automatic shut-off if internal components exceed safe temperatures
  2. Tip-Over Switch: Cuts power immediately if unit is knocked over or tilted
  3. Cool-Touch Housing: Exterior remains safe to touch during operation
  4. Automatic Shut-off: Activates if air intake or exhaust is blocked
  5. Stable Base Design: Wide footprint prevents accidental tipping

Important: Test safety features regularly to ensure proper function.

Operation Guide

Daily operation procedures for optimal heating performance.

  1. Power on: Plug into outlet, ensure unit is upright
  2. Set temperature: Rotate thermostat knob to desired setting
  3. Select heat level: Choose LOW, HIGH, or ENERGY SAVE
  4. Monitor operation: LED indicator shows unit is heating
  5. Automatic cycling: Unit turns on/off automatically to maintain temperature
  6. Power off: Unplug when not in use for extended periods

Tip: Use ENERGY SAVE mode for overnight operation to maintain comfort efficiently.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Unplug unit: Always disconnect power before cleaning
  2. Exterior cleaning: Wipe with dry, soft cloth only
  3. Air vent maintenance: Use vacuum with brush attachment to remove dust
  4. Storage: Cool completely, wrap cord, store in dry location
  5. Inspection: Check power cord regularly for damage

CAUTION! Never immerse in water or use liquid cleaners. Do not operate if damaged.

Regulatory Information

UL Listed for safety standards compliance. ETL Certified for electrical safety. Meets CPSC requirements for residential heating equipment. Copyright © 2025 Pelonis. For technical support, visit www.pelonis.com or contact 1-800-555-HEAT. Manufactured to meet or exceed industry safety standards.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not heatingPower source/thermostat settingCheck power outlet; ensure thermostat is above room temperature; verify unit is upright
Unit shuts off unexpectedlyOverheat protection activatedCheck for blocked vents; allow unit to cool; ensure proper clearance around unit
Tip-over switch activatingUneven surface or accidental tippingPlace on level surface; ensure unit is stable; check that all feet are contacting surface
Unusual odorsDust accumulation or first useClean air vents; odor should dissipate after initial use; if persistent, discontinue use
Insufficient heatWrong setting or room sizeSwitch to HIGH setting; ensure room size is appropriate for unit capacity; check thermostat setting

Reset: Unplug for 10 minutes, then restart if safety features activate repeatedly.

Service: 1-800-555-HEAT; www.pelonis.com

Pelonis Safe-T-Furnace Manual © - All Rights Reserved 2025