Pelonis Safe T Furnace Model 1500W Manual

The Pelonis Safe T Furnace Model 1500W is a high-efficiency portable electric furnace with 1500W heating capacity, automatic thermostat control, overheat protection, tip-over safety switch, cool-touch exterior, energy-saving ECO mode, digital temperature display, remote control operation, 24-hour programmable timer, and multiple heat settings. Designed for rooms up to 150 square feet with safety-certified construction. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Installation & Placement 4. Specifications 5. Controls and Operation 6. Remote Control Functions 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Storage Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, heating element, safety grille, tip-over switch, overheat protection, remote control, carrying handle, air intake/exhaust vents.

Feature	Description
Heating Capacity	1500W (5120 BTU/h) for rooms up to 150 sq ft
Thermostat Control	Digital automatic temperature control (50°F-95°F)
Safety Features	Overheat protection, tip-over automatic shutoff
Heat Settings	High (1500W), Low (900W), ECO mode
Timer Function	24-hour programmable timer
Remote Control	Full function remote included
Display	LED digital display with temperature readout
Power Cord	6-foot safety-approved power cord
Certifications	ETL listed, safety certified
Warranty	1-year limited warranty

Safety Precautions

Important safety instructions for proper operation and accident prevention.

Keep combustible materials at least 3 feet from front, sides, and rear.
Do not use in wet or damp areas like bathrooms or laundry rooms.
Ensure proper ventilation; do not block air intake or exhaust vents.
Plug directly into wall outlet; do not use extension cords.
Always place on stable, level surface to prevent tipping.

WARNING! Never leave heater unattended while in operation. Keep children and pets away from hot surfaces.

Installation & Placement

Proper placement ensures optimal performance and safety.

Choose location: Place on firm, level surface away from foot traffic.
Clearance: Maintain 3-foot clearance from walls, furniture, and curtains.
Power connection: Plug into grounded 120V AC outlet only.
Ventilation: Ensure air vents are unobstructed for proper airflow.
Stability: Verify unit sits firmly on floor without wobbling.

CAUTION! Do not use in confined spaces or areas with flammable vapors.

Specifications

Model: Pelonis Safe T Furnace 1500W
Power: 1500W, 120V AC, 60Hz, 12.5A
Heating Coverage: Up to 150 square feet
Heat Output: 5120 BTU/h
Thermostat Range: 50°F to 95°F (10°C to 35°C)
Heat Settings: High (1500W), Low (900W), ECO
Timer: 24-hour programmable
Dimensions: 13.5" H x 9.5" W x 7.5" D
Weight: 8.5 lbs
Safety Features: Overheat protection, tip-over switch, cool-touch exterior

Controls and Operation

Control Panel: POWER, MODE, TEMP ▲/▼, TIMER, OSCILLATION.

Operation Steps:

Press POWER button to turn on unit
Select heat mode: HIGH, LOW, or ECO
Set desired temperature using TEMP buttons
Use TIMER for automatic shutoff (1-24 hours)
Press OSCILLATION for wide-area heat distribution

ECO Mode: Automatically adjusts heating to maintain comfort while saving energy. Display shows current room temperature and set temperature.

Remote Control Functions

Remote control duplicates all panel functions for convenient operation.

Button	Function
POWER	Turns heater on/off
MODE	Cycles through HIGH, LOW, ECO
TEMP ▲/▼	Increases/decreases temperature setting
TIMER	Sets automatic shutoff timer
OSCILLATION	Turns wide-angle heating on/off

Battery: Requires 2 AAA batteries (not included). Point remote at front panel sensor.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug heater and allow to cool completely before cleaning
Wipe exterior with soft, dry cloth only
Clean air intake and exhaust vents with vacuum brush attachment
Check power cord regularly for damage
Store remote control in safe, dry location

CAUTION! Never immerse heater in water or use liquid cleaners. Do not operate if damaged.

Energy Saving Tips

Maximize efficiency and reduce energy costs.

Use ECO mode for automatic energy-saving operation
Set thermostat to lowest comfortable temperature (68°F recommended)
Use timer to heat rooms only when occupied
Close doors and windows in heated area
Clean air filters and vents regularly for optimal airflow
Use in well-insulated rooms for best efficiency

Storage Instructions

Proper storage during off-season periods.

Unplug heater and allow to cool completely
Clean exterior and air vents thoroughly
Wrap power cord neatly around base or handles
Store in original box or protective cover in dry location
Remove batteries from remote control before storage
Store in upright position to prevent damage

Regulatory Information

This heater complies with UL Standard 1278 for movable electric heaters. ETL listed meeting US safety standards. Manufactured for Pelonis. Copyright © 2025 Pelonis. For technical support and warranty service, contact 1-800-555-HEAT or visit www.pelonis.com. Keep these instructions for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater won't turn on	Power issue/tip-over	Check power outlet; reset GFCI; ensure unit is upright
No heat output	Settings/overheat	Check heat setting; wait for overheat reset (15 min)
Remote not working	Batteries/obstructions	Replace batteries; point at sensor; remove obstacles
Unusual odors	Dust accumulation	Normal during first use; clean air vents if persistent
Display not working	Power connection	Check power cord; reset unit by unplugging/replugging
Automatic shutoff	Overheat/tip-over	Check for obstructions; ensure proper placement

Reset: Unplug for 10 minutes, then restart if issues persist.

Service: 1-800-555-HEAT; www.pelonis.com